MENU

GGS XL NON ROTATING SUSPENSION WITH SWIVEL HEAD FOR VACUUM CUPS

Home | Components |  Gripper Arms  |  GGS XL NON ROTATING SUSPENSION WITH SWIVEL HEAD FOR VACUUM CUPS

Search

These are XL long suspensions featuring 2 x the suspension length than the regular GGS suspensions
GGS U Smooth sleeve for use in clamps
GGS U M Threaded sleeve and 2 clinch nuts for use in plates
Non rotating shaft, swivel head
Material: Brass sleeve, a stainless steel spring and a hollow, hard coated hexagon shaped aluminum shaft
The material composition of the shaft and the sleeve provides a lifetime lubrication. The use of lubricants is not recommended because it will attract dirt and increases friction and wear
1 side port for vacuum connection.
Head swivels and rotates on the shaft until the lock screw is tightened for an easy alignment of oval and round shaped vacuum cups
M = Threaded Shaft for use in plates

Part NoDescriptionSuspensionABCDEGHMaterialWeight
[mm][G][mm][mm][mm][mm][mm][mm][g]
9-07-360-080-0GGS 20-1/4-1/4-1001001/42021820175555AL/St/Brass209
9-07-360-084-0GGS M20-1/4-1/4-1001001/420218M20175555AL/St/Brass209
9-07-360-082-0GGS 14-1/8-1/8-80801/81616614133232AL/St/Brass85

Request Information