MENU

GRF-SH SENSOR HOLDER FOR MFS T2 3.7 SENSOR

Home | Components |  Gripper Fingers  |  Electrical  |  GRF-SH SENSOR HOLDER FOR MFS T2 3.7 SENSOR

Search

This holder is designed to install a MFS T2  teachable two position sensor to a GRF gripper finger. Sensor needs to be installed at the lower part of the GRF as shown in the ilustration below.

 

GRF-SH-AL_Example


Part NoDescriptionA [mm]B [mm]C [mm]D [mm]E [mm]MaterialWeight [g]
1-451-56-00GRF SH 14-MFS AL143.726.58.520ALUMINUM3
1-450-57-00GRF SH 20-MFS AL203.732.58.526ALUMINUM3
1-450-58-00GRF SH 30-MFS AL303.7438.536ALUMINUM4

Request Information