| Part No | Description |
|---|---|
| 9-05-100-01-00 | TC Thermocouple |
| 9-05-100-02-01 | HC 20-1 Heat Controller for 1 zone |
| 9-05-100-02-02 | HC 20-2 Heat Controller for 2 zones |
| 9-05-100-02-03 | HC 20-3 Heat Controller for 3 zones |
| 9-05-100-02-04 | HC 20-4 Heat Controller for 4 zones |
HC 20 Heat Controller
The HC 20 Heat Controller in conjunction with a heater cartridge can be used to heat Thrust Cutters TC-40, TC-63 and the Blade Holder KHR. The max temperature is set to 415F (213 C) at the heating element which translates to approx 350 F at the blade. The HC 20 can be configured to control up to for 4 zones. Each zone consists of a heater cartridge and a thermocouple. The thermocouple measures the temperature and sends it to the HC 20.
The input voltage is 115V and the power cord is 51/2 ft with a U.S. household plug. They are designed for a stationary operation.
More info below
| Part No | Description |
|---|---|
| 9-05-100-01-02 | HT 40 Heater Cartridge for Thrust Cutter 40 and KHR Blade Holder |
| 9-05-100-01-03 | HT 63 Heater Cartridge for Thrust Cutter 63 |
Cartridge Heater Elements
A-12853 is a heater element with a thermocoupler for use with HC-20
A-13026 is a cartridge only to heat a 2nd blade for use with HC-20
A-13242 is a thermocoupler only for use with HC-30
A-13241 heater element only for use with HC-30
*Thermocoupler (probe) gives feedback to the Heat Controller