SFP ROBOT GUIDE

SFP ROBOT GUIDE

The SFP Robot Guide sends a signal (NC) until the plunger is pushed 5mm into its barrel housing. A typical application is the de-stacking of parts from a magazine or guiding the robot into the moving side of a machine (platen) when the distance between the EOAT and the tool is critical as it is for insert applications.  The SFP can also be ordered with a NO sensor. In this case the sensor would give a signal after the plunger is 5mm pushed into the barrel housing. We offer a softer spring to reduce tension as an accessory.

The SFP is NOT A SAFTEY DEVICE. It can only be used in a manner that there would be no harm to humans or equipment if the sensor should fail. The SFP is recommended for 2,000,000 cycles and should be replaced after that.

Request Information